ATP
600/1200/1500/2500 Series Digitally Controlled
Torque Wrenches
Our
lightweight (10-13 lbs.) digitally controlled
torque wrenches are accurate to ±1% of
full scale and have a built-in microprocessor,
a PC interface
and a printer interface. Torquing
and operating data can be viewed, printed or
transmitted to a computer for analysis. Torque
values are read in ft.-lbs., in.-lbs. or N-m,
with no conversion
charts required to interpolate from pressure
gauge readings. Advanced Torque Products' 600/1200/1500/2500
Series digitally controlled torque wrenches are
equipped with an anti-rotation device to hold
torque without backing off. Each wrench is electronically
calibrated in both directions, eliminating variances
in CW and CCW calibration.
This
series was developed for organizations with intermediate
torque needs, confronting today's increased emphasis
on safety and ergonomic concerns. Its state-of-the-art
design, lightweight portability and accuracy
have made this wrench the preferred tool of many
companies. When safety and ergonomic issues are
primary concerns, Advanced Torque's digitally
controlled torque wrenches are the answer.
Easy
retrofit to customer requirements: Drive
adapter, reaction pin diameter and pin spacing
can be customized to customer specifications.
The
design of the ATP 600/1200/1500/2500 provides
ease of use for the operator and works to prevent
injuries and muscle stress incurred during repeated
applications and operations. This unit requires
a minimal amount of exertion to achieve the desired
torque value and is very easy to use: |
 |
| • |
Portable,
lightweight and precise |
| • |
Used to apply, measure and record torque
in precise amounts |
| • |
Designed for production, maintenance and
R & D analysis |
|
|
| |
• |
Controller
indicates CW or CCW direction. |
| • |
Features
a built-in
microprocessor, an RS-232 PC interface and a printer
interface. |
| • |
Torquing and operating data can be viewed, printed
or transmitted to a computer for permanent record. |
| • |
Two methods of developing printed outputs: connect
the ATP Series Torque Wrench directly to either a
printer or PC. |
| • |
Printing techniques permit capture of data for
process verification, QA compliance and permanent
files without manual notation of date, time, torque
and other data. |
Various
torque ranges are available in this hydraulic wrench
series. Ranges are determined by specific customer
torque requirements and needs. The following wrench
specifications relate to all torque ranges for
the noted series:
| ATP
600/1200/1500/2500 Series Wrench Specifications |
| |
600 |
1,200 |
1,500 |
2,500 |
| Weight: |
10
lbs. |
13
lbs. |
|
|
| Diameter: |
8" |
8" |
|
|
| Height: |
6" |
6" |
|
|
| Torque
Range: |
0-600
ft.-lbs.
0-7,200 in.-lbs.
0-815 N-m |
0-1,200
ft.-lbs.
0-14,400 in.-lbs.
0-1,630 N-m |
|
|
| Torque
Accuracy: |
± 1%
full scale |
| Controller |
| |
• |
Displays
torque direction (CW or CCW), torque readings and
angular rotation. |
| • |
The
TORQUE/ANGLE/PEAK button is used to set the mode
of the wrench for measuring torque or angle against
a preset target. |
| • |
Alarm
issues a visible and audible warning when the torquing
process reaches a preselected percentage. |
| |
| Adaptive
Tooling |
| |
• |
A
wide selection of drive adapters and mounting fixtures
allow the ATP digitally controlled wrench to be
used with existing tooling. |
| |
| Carrying
Case / Cart |
| |
• |
For
ease of use, a carrying case and cart are available
to organize, store and transport all Advanced Torque
Products torquing equipment. |
| ATP
600 / PWC 64206 ATP
1000 / PWA 107381 |
|
Lightweight
(10 lbs.) torquing unit featuring 25:1 sun
gear multiplier and optional
stretch
dial. Equipped with standard 1" female drive
and two 1/2" reaction pins on a 3" bolt
circle.
Shown
at right is a unit custom-made for Pratt & Whitney
Canada and approved as a PWC 64206. Offers 600
ft.-lbs. of torque, a 25:1 sun gear drive
with stretch dial, anti-rotation device and spline
drive adapter. This unit retrofits to all PWC
200 Series engines. |
 |
| |
Top
of page |
| ATP
1200/2500 ATP
1500 / PWA 107386 CTW1200-T55 |
|
Model
ATP 1200/1500, shown at left with optional stretch
dial, weighs only 13 lbs. Model ATP 1500 has
also been customized for Pratt & Whitney
Canada (please see PWC 90112 specs below). Model
ATP
2500 shown
at right,
without
stretch dial.
CTW1200-T55 – NSN # 4920-01-546-0471 |
 |
| |
Top
of page |
| PWC
90112 |
|
 The
ATP 1500 Torquing Unit has been customized for
Pratt & Whitney Canada and approved as a
PWC 90112 with a 75:1 sun gear multiplier. This
new wrench can be easily adapted to existing
tooling
and
is
an
interchangeable
alternative to both the PWC 31050 and PWC 41050.
It weighs only about 19 lbs. and is easy to
use. On-site training in its use is
also available.
Rated
to 1500 ft.-lbs. Meets or exceeds specifications
of PWC 31050 and PWC 41050.
|
|
