Advanced Torque Products: Hand-Held Rotary Reaction Torque Sensors and Fixed Reaction Torque Sensors

Hand-Held Rotary or Fixed Reaction Sensors

These lightweight (1 to 7 lbs.) hand-held torquing units utilize state-of-the-art technology to permit maximum adaptability to various applications. Low torque values are read from in.-oz. to ft.-lbs. A printer interface permits operating data to be viewed, printed or transmitted to a computer for hard copy verification. An alarm beeps when applied load reaches the preset level, and the unit features a sensor overload warning indication. A scalable analog output jack is provided for connection to a plotter or panel meter.

Easy retrofit to customer requirements: This series of Hand-Held Rotary or Fixed Reaction Sensors is available in a wide range of sizes. Custom configurations available upon request.

These units are very easy to use:

ATP 2500 Digitally Controlled Torque Wrench

•	Portable, lightweight and precise
•	Used to apply, measure and record torque in precise amounts
•	Designed for production, maintenance and R & D analysis

	•	Lightweight, digital readout facilitates operator ease of use.
	•	Alarm beeps when applied load reaches the preset level; an external jack is also provided with volume control to allow connection of headphones for use in noisy areas.
	•	Sensor overload warning indication
	•	RS-232 output provides interface to a PC or printer
	•	Scaleable analog output jack is provided for connection to a plotter or panel meter.
	•	Printing technique permits capture of data for process verification, QA compliance and permanent files without manual notation of date, time torque and other data.

*JT4000 Model*
	•	A portable digital indicator designed for use with socket wrench sensors.
	•	Unit utilizes smart sensor technology in which the calibration data of each sensor is stored on an EPROM located in the sensor.
	•	This technology allows the user to interchange sensors without additional calibration.
	•	Unit is fully compatible with all strain-gage-based transducers.
	•	Features: 32-Digit Alpha-Numeric Display; Peak/Hold; Push-Button Zero; Alarm; Auto Shutoff; Rechargeable Nicad Battery Pack; RS-232 Output; User-Selectable Units; Analog Output; Smart Sensor Compatible

Specifications
Size:	5" W x 2-1/4" H x 5-1/4" D
Weight:	1 lbs.
Accuracy:	0.5% of reading
Case Material:	ABS Plastic
Temperature (Storage):	-20° to 200° F
Temperature (Operating):	-32° to 130° F

*Socket Wrench Torque Sensor Unit*
	•	Advanced Torque's Test & Measurement Systems (TBE) Socket Wrench Torque Sensors are available in two models: a slip-ring type rotating sensor (Model 12346) and a reaction type (Model 17430).
	•	Both sensors utilize strain gage technology and are adaptable to all strain gage type indicators.
	•	Sensors operate in both directions: CW and CCW.
	•	Units are supplied with a Certificate of Calibration traceable to N.I.S.T.
	•	Data can be displayed in graphical form or transferred in table format to a spread sheet program (such as Lotus™) for further analysis.
	•	Rotary transducer can be configured with an air or electric drive for auto shutoff at desired torque.

Specifications
Output at Rated Torque:	1.5-3 mv/v Nominal
Calibration Accuracy:	0.25% F.S.
Overload Rating:	150%
Excitation Max. DC:	10V
Bridge Resistance:	350 ohms
Zero Balance:	± 1% F.S.
Temp. Effect on Zero:	0.0025% F.S./°F
Compensated Temp. Range:	72° to 150° F ± 3° F

Socket Wrench Torque Sensor Unit Model Specifications

Model	Capacity	Dimensions
Model	Capacity	Drive Size	A	B	C	D	E
12346-2	200 in.-lb.	1/4"	4-1/8"	2-7/8"	3/4"	1"	3"
12346-5	50 ft.-lb.	3/8"	4-1/8"	2-7/8"	3/4"	1"	3"
12346-10	100 ft.-lb.	3/8"	4-1/8"	2-7/8"	3/4"	1"	3"
12346-25	250 ft.-lb.	1/2"	4-1/8"	2-7/8"	3/4"	1"	3"
12346-60	600 ft.-lb.	3/4"	6"	3-3/4"	1-5/16"	1-3/4"	4-1/8"
17430-05	50 in.-lb.	1/4"	2-1/16"	1-5/16"	3/8"	5/8"
17430-2	200 in.-lb.	1/4"	2-1/16"	1-5/16"	3/8"	5/8"
17430-5	50 ft.-lb.	3/8"	2-5/16"	1-5/16"	1/2"	7/8"
17430-10	100 ft.-lb.	3/8"	2-5/8"	1-5/16"	1/2"	7/8"
17430-25	250 ft.-lb.	1/2"	2-5/8"	1-1/2"	11/16"	1-1/8"
17430-60	600 ft.-lb.	3/4"	3-15/16"	2"	1-1/16"	1-5/8"

Please consult factory for custom sizes and applications.
Specifications and dimensions are subject to change without notice.

Top of page

Advanced Torque Products, LLC
921 Farmington Ave., Kensington, CT 06037 • Ph: 860-828-1523 • Fax: 860-828-1163 • sales@advancedtorque.com